• Polymounts - Tapped Style

These value oriented levelers are built for a wide range of applications, from conveyor lines to production machinery. Corrosion resistant glass fiber reinforced nylon base is attractive, yet very durable. Base diameters available from 2 inches to 5 inches.

    Features:
  • 15 degree tilt off centerline allows for mounting on uneven surfaces
  • Studs are made of either low carbon steel with clear zinc finish or 300 grade stainless steel
  • All stud styles come with matching lock nut
  • Glass fiber nylon base
  • Available with or without non-skid elastomer pad
  • "Pop out" lag holes allow for mounting the base to the floor
  • Tapped nut style also available for those applications where a mounting stud already exists

1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items Search by Specification
Clear Filter

Material

Thread Size

Load (Max.) (lb)

Max Load

Item #

CAD

IntegrationID

Material

Thread Size

E - Hex Size

B - Base Diameter

D - Total Height

Max Load

Stud Length

N/A N/A
5981 		N/A Steel N/A 3/8-16 N/A 0.63 in N/A 2.00 in N/A 1.44 in N/A 4000 lbs (1814 kg) N/A
N/A N/A
5982 		N/A Steel N/A 1/2-13 N/A 3/4 in N/A 2.00 in N/A 1.63 in N/A 4000 lbs (1814 kg) N/A
N/A N/A
5983 		N/A Steel N/A 1/2-13 N/A 3/4 in N/A 3.00 in N/A 1.63 in N/A 5000 lbs (2268 kg) N/A
N/A N/A
5984 		N/A Steel N/A 5/8-11 N/A 0.88 in N/A 3.00 in N/A 1.69 in N/A 5000 lbs (2268 kg) N/A
N/A N/A
5985 		N/A Steel N/A 3/4-10 N/A 1.06 in N/A 4.00 in N/A 2.00 in N/A 7500 lbs (3402 kg) N/A
N/A N/A
5986 		N/A Steel N/A 1-8 N/A 1.38 in N/A 4.00 in N/A 2.38 in N/A 7500 lbs (3402 kg) N/A
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1