AS568 PTFE O-Rings - 900 Series
O-Rings
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -901 PTFE-70 -901 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.056 in | Durometer N/A 70 | Inside Diameter N/A 0.185 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -901 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -902 PTFE-70 -902 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.064 in | Durometer N/A 70 | Inside Diameter N/A 0.239 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -902 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -903 PTFE-70 -903 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.064 in | Durometer N/A 70 | Inside Diameter N/A 0.301 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -903 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -904 PTFE-70 -904 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.072 in | Durometer N/A 70 | Inside Diameter N/A 0.351 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -904 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -905 PTFE-70 -905 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.072 in | Durometer N/A 70 | Inside Diameter N/A 0.414 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -905 | Units of Measure N/A Imperial | Tube Size O.D. N/A 5/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -906 PTFE-70 -906 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.078 in | Durometer N/A 70 | Inside Diameter N/A 0.468 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -906 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -907 PTFE-70 -907 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.082 in | Durometer N/A 70 | Inside Diameter N/A 0.530 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -907 | Units of Measure N/A Imperial | Tube Size O.D. N/A 7/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -908 PTFE-70 -908 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.087 in | Durometer N/A 70 | Inside Diameter N/A 0.644 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -908 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -909 PTFE-70 -909 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.097 in | Durometer N/A 70 | Inside Diameter N/A 0.706 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -909 | Units of Measure N/A Imperial | Tube Size O.D. N/A 9/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -910 PTFE-70 -910 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.097 in | Durometer N/A 70 | Inside Diameter N/A 0.755 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -910 | Units of Measure N/A Imperial | Tube Size O.D. N/A 5/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -911 PTFE-70 -911 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.863 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -911 | Units of Measure N/A Imperial | Tube Size O.D. N/A 11/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -912 PTFE-70 -912 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.924 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -912 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -913 PTFE-70 -913 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.986 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.01 in | Size Reference - AS568 N/A -913 | Units of Measure N/A Imperial | Tube Size O.D. N/A 13/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -914 PTFE-70 -914 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.047 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.01 in | Size Reference - AS568 N/A -914 | Units of Measure N/A Imperial | Tube Size O.D. N/A 7/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -916 PTFE-70 -916 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.171 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.01 in | Size Reference - AS568 N/A -916 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -918 PTFE-70 -918 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.355 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.012 in | Size Reference - AS568 N/A -918 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -920 PTFE-70 -920 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.118 in | Durometer N/A 70 | Inside Diameter N/A 1.475 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.014 in | Size Reference - AS568 N/A -920 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -924 PTFE-70 -924 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.118 in | Durometer N/A 70 | Inside Diameter N/A 1.720 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.014 in | Size Reference - AS568 N/A -924 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -928 PTFE-70 -928 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.118 in | Durometer N/A 70 | Inside Diameter N/A 2.090 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.018 in | Size Reference - AS568 N/A -928 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-3/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -932 PTFE-70 -932 PTFE-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.118 in | Durometer N/A 70 | Inside Diameter N/A 2.337 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.018 in | Size Reference - AS568 N/A -932 | Units of Measure N/A Imperial | Tube Size O.D. N/A 2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -901 PTFE-75 -901 PTFE-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.056 in | Durometer N/A 75 | Inside Diameter N/A 0.185 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -901 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -902 PTFE-75 -902 PTFE-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.064 in | Durometer N/A 75 | Inside Diameter N/A 0.239 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -902 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -903 PTFE-75 -903 PTFE-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.064 in | Durometer N/A 75 | Inside Diameter N/A 0.301 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -903 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -904 PTFE-75 -904 PTFE-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.072 in | Durometer N/A 75 | Inside Diameter N/A 0.351 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -904 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -905 PTFE-75 -905 PTFE-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A PTFE | Cross Section Width N/A 0.072 in | Durometer N/A 75 | Inside Diameter N/A 0.414 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -905 | Units of Measure N/A Imperial | Tube Size O.D. N/A 5/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
