• Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardned - Steel - Inch

Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.

    (Kipp Original Design)
    • 1 - 16 of 16 | Results Per Page | View | Unit of Measure
    1 
    Request Information Compare Items
    Clear Filter

    Item #

    IntegrationID

    Material

    Style

    L

    D

    H

    D2

    L2

    L1

    D1

    F x 30°

    SW

    N/A
    77340         		N/A Stainless Steel N/A G N/A 33.00 mm N/A 3.00 mm N/A 5.00 mm N/A 14.00 mm N/A 11.00 mm N/A 17.00 mm N/A M6 X 0.75 mm N/A 0.80 mm N/A
    N/A
    77341         		N/A Stainless Steel N/A G N/A 41.00 mm N/A 4.00 mm N/A 6.00 mm N/A 18.00 mm N/A 14.00 mm N/A 21.00 mm N/A M8 X 1.00 mm N/A 1.00 mm N/A
    N/A
    77342         		N/A Stainless Steel N/A G N/A 47.00 mm N/A 5.00 mm N/A 8.00 mm N/A 21.00 mm N/A 15.00 mm N/A 24.00 mm N/A M10 X 1.00 mm N/A 1.30 mm N/A
    N/A
    77343         		N/A Stainless Steel N/A G N/A 55.00 mm N/A 6.00 mm N/A 9 mm N/A 25.00 mm N/A 18.00 mm N/A 28.00 mm N/A M12 X 1.50 mm N/A 1.80 mm N/A
    N/A
    77344         		N/A Stainless Steel N/A G N/A 72.00 mm N/A 8.00 mm N/A 12 mm N/A 33.00 mm N/A 24.00 mm N/A 36.00 mm N/A M16 X 1.50 mm N/A 2.30 mm N/A
    N/A
    77345         		N/A Stainless Steel N/A G N/A 79.00 mm N/A 10.00 mm N/A 15 mm N/A 33.00 mm N/A 24.00 mm N/A 40.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A
    N/A
    77346         		N/A Stainless Steel N/A G N/A 84.00 mm N/A 12.00 mm N/A 18 mm N/A 33.00 mm N/A 24.00 mm N/A 42.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A
    N/A
    77347         		N/A Stainless Steel N/A G N/A 104.00 mm N/A 16.00 mm N/A 24.00 mm N/A 40.00 mm N/A 30.00 mm N/A 50.00 mm N/A M24 X 2.00 mm N/A 3.20 mm N/A
    N/A
    77348         		N/A Stainless Steel N/A H N/A 33.00 mm N/A 3.00 mm N/A 5.00 mm N/A 14.00 mm N/A 11.00 mm N/A 17.00 mm N/A M6 X 0.75 mm N/A 0.80 mm N/A 10 mm
    N/A
    77349         		N/A Stainless Steel N/A H N/A 41.00 mm N/A 4.00 mm N/A 6.00 mm N/A 18.00 mm N/A 14.00 mm N/A 21.00 mm N/A M8 X 1.00 mm N/A 1.00 mm N/A 13 mm
    N/A
    77350         		N/A Stainless Steel N/A H N/A 47.00 mm N/A 5.00 mm N/A 8.00 mm N/A 21.00 mm N/A 15.00 mm N/A 24.00 mm N/A M10 X 1.00 mm N/A 1.30 mm N/A 17 mm
    N/A
    77351         		N/A Stainless Steel N/A H N/A 55.00 mm N/A 6.00 mm N/A 9 mm N/A 25.00 mm N/A 18.00 mm N/A 28.00 mm N/A M12 X 1.50 mm N/A 1.80 mm N/A 19 mm
    N/A
    77352         		N/A Stainless Steel N/A H N/A 72.00 mm N/A 8.00 mm N/A 12 mm N/A 33.00 mm N/A 24.00 mm N/A 36.00 mm N/A M16 X 1.50 mm N/A 2.30 mm N/A 24 mm
    N/A
    77353         		N/A Stainless Steel N/A H N/A 79.00 mm N/A 10.00 mm N/A 15 mm N/A 33.00 mm N/A 24.00 mm N/A 40.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A 30 mm
    N/A
    77354         		N/A Stainless Steel N/A H N/A 84.00 mm N/A 12.00 mm N/A 18 mm N/A 33.00 mm N/A 24.00 mm N/A 42.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A 30 mm
    N/A
    77355         		N/A Stainless Steel N/A H N/A 104.00 mm N/A 16.00 mm N/A 24.00 mm N/A 40.00 mm N/A 30.00 mm N/A 50.00 mm N/A M24 X 2.00 mm N/A 3.20 mm N/A 36 mm
    1 - 16 of 16 | Results Per Page | View | Unit of Measure
    1