Sleeves Push Fit - Metric
Handle Sleeve (7 Styles)
ELESA Original Design.
We have many hand sleeves in stock. Please call for any special reuirements
-
Features:
- Material - Elastomer Technopolymer with Shore Hardness of D 40
- Finish - Matte Black
- Push-fit on Plain Shaft - h9 Tolerance
- Elastic Coupling - Not Affected by Vibrations and does not Tend to Loosen
- Resistant to Solvents, Oils, Greases, and other Chemical Agents
- Tapped Blind Hole Assembly instructions: Carefully fit handle onto slightly chamfered end of shaft and push as far as possible by hand; then tap handle with a wooden or plastic mallet until firmly in place.
ELESA Original Design.
Item # |
CAD |
IntegrationID |
Material |
Finish |
A - Thread Size |
B - Handle Diameter |
D - Diameter |
F - Overall Length |
Z4 - Depth |
Alternate P/N |
|---|---|---|---|---|---|---|---|---|---|---|
| M-30938 M-30938/Asset/30938P.jpg |
CAD
N/A 
|
IntegrationID
N/A 3801 |
Material N/A Elastomer Technopolymer | Finish N/A Matte Black | A - Thread Size N/A M10 x1.50 | B - Handle Diameter N/A 21.00 mm | D - Diameter N/A 45.00 mm | F - Overall Length N/A 65.00 mm | Z4 - Depth N/A 50.00 mm | Alternate P/N N/A 30938 |
| M-30939 M-30939/Asset/30938P.jpg |
CAD
N/A
|
IntegrationID
N/A 3802 |
Material N/A Elastomer Technopolymer | Finish N/A Matte Black | A - Thread Size N/A M12 x1.75 | B - Handle Diameter N/A 21.00 mm | D - Diameter N/A 45.00 mm | F - Overall Length N/A 65.00 mm | Z4 - Depth N/A 50.00 mm | Alternate P/N N/A 30939 |
