• Grip Knob - Tapped Blind Hole - Inch

Plastic grip knobs are designed to provide a positive, non-slip grip, these knobs are ideal where a firm fastening action is required. Gripping surface is available in 3 versions; “ribbed”, “knurled”, or “fluted”. Gripping surface is comfortable and free of any sharp, uncomfortable edges. A large selection of insert or stud materials are available including, but not limited to: steel, brass, stainless steel, and zinc plated.

    Features
  • High strength polypropylene (PP) with smooth channel fluting
  • provides a comfortable, sold gripping surface for fingers
  • Resistant to solvents, chemicals and cutting fluids
  • Brass insert protrudes beyond flush to give a shouldering effect
  • ELESA Original Design

1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items Search by Specification
Clear Filter

Thread

Diameter

Item #

IntegrationID

Material

d2

d - Thread

L-Total Height

d1 - Hub Diameter

l2 - Hub Projection

h

Handle Type

Protrusion

Diameter

Alternate P/N

N/A
7990 		N/A Polypropylene N/A 0.43 in N/A 8-32 N/A 0.63 in N/A 0.47 in N/A 0.24 in N/A 0.24 in N/A Round N/A 0.01 in N/A 0.79 in (20 mm) N/A
N/A
7991 		N/A Polypropylene N/A 0.43 in N/A 10-32 N/A 0.63 in N/A 0.47 in N/A 0.24 in N/A 0.24 in N/A Round N/A 0.01 in N/A 0.79 in (20 mm) N/A 29161
N/A
7992 		N/A Polypropylene N/A 0.59 in N/A 10-32 N/A 0.75 in N/A 0.63 in N/A 0.31 in N/A 0.39 in N/A Round N/A 0.01 in N/A 1.00 in (25.4 mm) N/A 29162
N/A
7993 		N/A Polypropylene N/A 0.59 in N/A 1/4-20 N/A 0.75 in N/A 0.63 in N/A 0.31 in N/A 0.31 in N/A Round N/A 0.01 in N/A 1.00 in (25.4 mm) N/A 29163
N/A
7994 		N/A Polypropylene N/A 0.83 in N/A 1/4-20 N/A 0.87 in N/A 0.67 in N/A 0.35 in N/A 0.39 in N/A Round N/A 0.01 in N/A 1.26 in (32 mm) N/A
N/A
7995 		N/A Polypropylene N/A 0.83 in N/A 5/16-18 N/A 0.87 in N/A 0.67 in N/A 0.35 in N/A 0.39 in N/A Round N/A 0.01 in N/A 1.26 in (32 mm) N/A
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1