• Alnico Magnet Assemblies - Jacket Shielded

Alnico magnetic material shielded in a brass sleeve, 1-Pole on each end. Insulator sleeve prevents a loss of magnetic flux when inserted into steel components or fixtures. Press fit style only. +/-.001" diameter & +/- .005" length. Maximum temperature is 800 Fahrenheit (427C). Holding forces stated are shown at 50% of the actual tested value. Thickness indicates sidewall thickness.

Did you want to learn more about Magnets? Give us a call or take a look at our magnet guides.

1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

IntegrationID

Diameter

Overall Length

Thickness

Holding Value (Flat Items)

N/A
1824 		N/A 0.19 in N/A 0.25 in N/A 0.02 in N/A 0.03 lb
N/A
1825 		N/A 0.19 in N/A 0.50 in N/A 0.02 in N/A 0.04 lb
N/A
1826 		N/A 0.25 in N/A 0.25 in N/A .030 in N/A 0.06 lb
N/A
1827 		N/A 0.25 in N/A 0.50 in N/A .030 in N/A 0.14 lb
N/A
1828 		N/A 0.31 in N/A 0.25 in N/A .030 in N/A 0.06 lb
N/A
1829 		N/A 0.31 in N/A 0.50 in N/A .030 in N/A 0.18 lb
N/A
1830 		N/A 0.38 in N/A 0.38 in N/A .030 in N/A 0.10 lb
N/A
31317 		N/A 0.38 in N/A 0.75 in N/A 0.032 in N/A 0.0907 lb
N/A
1831 		N/A 0.50 in N/A 0.50 in N/A .030 in N/A 0.23 lb
N/A
1832 		N/A 0.75 in N/A 0.75 in N/A 0.06 in N/A 0.07 lb
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1