AS568 Viton O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.. Viton® is also known as: Fluorocarbon and FKM. Viton® is a registered trademarks of DuPont® Dow Elastomers.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Durometer
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
152V75 152V75/Asset/oring71.jpg |
IntegrationID
N/A 192193 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 82.22 mm3.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -152 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
152V90 152V90/Asset/oring71.jpg |
IntegrationID
N/A 192194 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 82.22 mm3.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -152 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
153V75 153V75/Asset/oring71.jpg |
IntegrationID
N/A 192195 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 88.57 mm3.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -153 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
153V90 153V90/Asset/oring71.jpg |
IntegrationID
N/A 192196 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 88.57 mm3.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -153 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
154V75 154V75/Asset/oring71.jpg |
IntegrationID
N/A 192197 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 94.92 mm3.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.028 in0.71 mm | Size Reference - AS568 N/A -154 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
154V90 154V90/Asset/oring71.jpg |
IntegrationID
N/A 192198 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 94.92 mm3.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.028 in0.71 mm | Size Reference - AS568 N/A -154 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
155V75 155V75/Asset/oring71.jpg |
IntegrationID
N/A 192199 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 101.27 mm3.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.028 in0.71 mm | Size Reference - AS568 N/A -155 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
155V90 155V90/Asset/oring71.jpg |
IntegrationID
N/A 192200 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 101.27 mm3.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.028 in0.71 mm | Size Reference - AS568 N/A -155 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
156V75 156V75/Asset/oring71.jpg |
IntegrationID
N/A 192201 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 107.62 mm4.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.030 in0.76 mm | Size Reference - AS568 N/A -156 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
156V90 156V90/Asset/oring71.jpg |
IntegrationID
N/A 192202 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 107.62 mm4.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.030 in0.76 mm | Size Reference - AS568 N/A -156 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
157V75 157V75/Asset/oring71.jpg |
IntegrationID
N/A 192203 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 113.97 mm4.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.030 in0.76 mm | Size Reference - AS568 N/A -157 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
157V90 157V90/Asset/oring71.jpg |
IntegrationID
N/A 192204 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 113.97 mm4.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.030 in0.76 mm | Size Reference - AS568 N/A -157 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
158V75 158V75/Asset/oring71.jpg |
IntegrationID
N/A 192205 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 120.32 mm4.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.030 in0.76 mm | Size Reference - AS568 N/A -158 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
158V90 158V90/Asset/oring71.jpg |
IntegrationID
N/A 192206 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 120.32 mm4.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.030 in0.76 mm | Size Reference - AS568 N/A -158 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
159V75 159V75/Asset/oring71.jpg |
IntegrationID
N/A 192207 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 126.67 mm4.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -159 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
159V90 159V90/Asset/oring71.jpg |
IntegrationID
N/A 192208 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 126.67 mm4.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -159 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
160V75 160V75/Asset/oring71.jpg |
IntegrationID
N/A 192209 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 133.02 mm5.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -160 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
160V90 160V90/Asset/oring71.jpg |
IntegrationID
N/A 192210 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 133.02 mm5.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -160 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
161V75 161V75/Asset/oring71.jpg |
IntegrationID
N/A 192211 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 139.37 mm5.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -161 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
161V90 161V90/Asset/oring71.jpg |
IntegrationID
N/A 192212 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 139.37 mm5.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -161 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
162V75 162V75/Asset/oring71.jpg |
IntegrationID
N/A 192213 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 145.72 mm5.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -162 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
162V90 162V90/Asset/oring71.jpg |
IntegrationID
N/A 192214 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 145.72 mm5.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -162 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
163V75 163V75/Asset/oring71.jpg |
IntegrationID
N/A 192215 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 152.07 mm5.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -163 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
163V90 163V90/Asset/oring71.jpg |
IntegrationID
N/A 192216 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 152.07 mm5.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -163 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
164V75 164V75/Asset/oring71.jpg |
IntegrationID
N/A 192217 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 158.42 mm6.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.040 in1.02 mm | Size Reference - AS568 N/A -164 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |