AS568 Viton O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.. Viton® is also known as: Fluorocarbon and FKM. Viton® is a registered trademarks of DuPont® Dow Elastomers.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Durometer
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
302829 302829/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.097 in | Durometer N/A 75 | Inside Diameter N/A 0.755 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -910 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 5/8 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302830 302830/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 0.863 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -911 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 11/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302831 302831/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 0.924 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -912 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 3/4 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v | |
302832 302832/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 0.986 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.01 in | Size Reference - AS568 N/A -913 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 13/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302833 302833/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 1.047 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.01 in | Size Reference - AS568 N/A -914 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 7/8 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302834 302834/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 1.171 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.01 in | Size Reference - AS568 N/A -916 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302835 302835/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 1.355 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.012 in | Size Reference - AS568 N/A -918 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1-1/8 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302836 302836/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.118 in | Durometer N/A 75 | Inside Diameter N/A 1.475 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.014 in | Size Reference - AS568 N/A -920 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1-1/4 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302837 302837/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.118 in | Durometer N/A 75 | Inside Diameter N/A 1.720 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.014 in | Size Reference - AS568 N/A -924 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1-1/2 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302838 302838/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.118 in | Durometer N/A 75 | Inside Diameter N/A 2.090 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.018 in | Size Reference - AS568 N/A -928 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1-3/4 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302839 302839/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.118 in | Durometer N/A 75 | Inside Diameter N/A 2.337 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.018 in | Size Reference - AS568 N/A -932 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 2 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302840 302840/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.056 in | Durometer N/A 90 | Inside Diameter N/A 0.185 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -901 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 3/32 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302841 302841/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.064 in | Durometer N/A 90 | Inside Diameter N/A 0.239 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -902 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1/8 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302842 302842/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.064 in | Durometer N/A 90 | Inside Diameter N/A 0.301 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -903 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 3/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302843 302843/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.072 in | Durometer N/A 90 | Inside Diameter N/A 0.351 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -904 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1/4 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302844 302844/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.072 in | Durometer N/A 90 | Inside Diameter N/A 0.414 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -905 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 5/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302845 302845/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.078 in | Durometer N/A 90 | Inside Diameter N/A 0.468 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -906 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 3/8 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v | |
302846 302846/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.082 in | Durometer N/A 90 | Inside Diameter N/A 0.530 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -907 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 7/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302847 302847/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.087 in | Durometer N/A 90 | Inside Diameter N/A 0.644 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -908 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1/2 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302848 302848/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.097 in | Durometer N/A 90 | Inside Diameter N/A 0.706 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -909 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 9/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302849 302849/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.097 in | Durometer N/A 90 | Inside Diameter N/A 0.755 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -910 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 5/8 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302850 302850/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 0.863 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -911 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 11/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302851 302851/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 0.924 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -912 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 3/4 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302852 302852/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 0.986 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.01 in | Size Reference - AS568 N/A -913 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 13/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
302853 302853/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 1.047 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.01 in | Size Reference - AS568 N/A -914 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 7/8 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |