AS568 Viton O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.. Viton® is also known as: Fluorocarbon and FKM. Viton® is a registered trademarks of DuPont® Dow Elastomers.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Durometer
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 464V90 464V90/Asset/oring71.jpg |
IntegrationID
N/A 192718 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 443.36 mm17.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -464 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 465V75 465V75/Asset/oring71.jpg |
IntegrationID
N/A 192719 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 456.06 mm17.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -465 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 465V90 465V90/Asset/oring71.jpg |
IntegrationID
N/A 192720 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 456.06 mm17.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -465 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 466V75 466V75/Asset/oring71.jpg |
IntegrationID
N/A 192721 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 468.76 mm18.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -466 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 466V90 466V90/Asset/oring71.jpg |
IntegrationID
N/A 192722 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 468.76 mm18.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -466 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 467V75 467V75/Asset/oring71.jpg |
IntegrationID
N/A 192723 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 481.46 mm18.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.25 mm | Size Reference - AS568 N/A -467 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 467V90 467V90/Asset/oring71.jpg |
IntegrationID
N/A 192724 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 481.46 mm18.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.25 mm | Size Reference - AS568 N/A -467 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 468V75 468V75/Asset/oring71.jpg |
IntegrationID
N/A 192725 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 494.16 mm19.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.25 mm | Size Reference - AS568 N/A -468 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 468V90 468V90/Asset/oring71.jpg |
IntegrationID
N/A 192726 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 494.16 mm19.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.25 mm | Size Reference - AS568 N/A -468 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 469V75 469V75/Asset/oring71.jpg |
IntegrationID
N/A 192727 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 506.86 mm19.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.45 mm | Size Reference - AS568 N/A -469 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 469V90 469V90/Asset/oring71.jpg |
IntegrationID
N/A 192728 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 506.86 mm19.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.45 mm | Size Reference - AS568 N/A -469 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 470V75 470V75/Asset/oring71.jpg |
IntegrationID
N/A 192729 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 532.26 mm20.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.45 mm | Size Reference - AS568 N/A -470 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
| 470V90 470V90/Asset/oring71.jpg |
IntegrationID
N/A 192730 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 532.26 mm20.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.45 mm | Size Reference - AS568 N/A -470 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 471V75 471V75/Asset/oring71.jpg |
IntegrationID
N/A 192731 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 557.66 mm21.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.100 in2.55 mm | Size Reference - AS568 N/A -471 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 471V90 471V90/Asset/oring71.jpg |
IntegrationID
N/A 192732 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 557.66 mm21.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.100 in2.55 mm | Size Reference - AS568 N/A -471 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 472V75 472V75/Asset/oring71.jpg |
IntegrationID
N/A 192733 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 582.65 mm22.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.105 in2.65 mm | Size Reference - AS568 N/A -472 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 472V90 472V90/Asset/oring71.jpg |
IntegrationID
N/A 192734 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 582.65 mm22.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.105 in2.65 mm | Size Reference - AS568 N/A -472 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 473V75 473V75/Asset/oring71.jpg |
IntegrationID
N/A 192735 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 608.10 mm23.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.110 in2.80 mm | Size Reference - AS568 N/A -473 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 473V90 473V90/Asset/oring71.jpg |
IntegrationID
N/A 192736 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 608.10 mm23.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.110 in2.80 mm | Size Reference - AS568 N/A -473 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 474V75 474V75/Asset/oring71.jpg |
IntegrationID
N/A 192737 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 633.50 mm24.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.115 in2.90 mm | Size Reference - AS568 N/A -474 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 474V90 474V90/Asset/oring71.jpg |
IntegrationID
N/A 192738 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 633.50 mm24.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.115 in2.90 mm | Size Reference - AS568 N/A -474 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 475V75 475V75/Asset/oring71.jpg |
IntegrationID
N/A 192739 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 658.85 mm25.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.120 in3.05 mm | Size Reference - AS568 N/A -475 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 475V90 475V90/Asset/oring71.jpg |
IntegrationID
N/A 192740 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 658.85 mm25.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.120 in3.05 mm | Size Reference - AS568 N/A -475 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 302802 302802/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.064 in | Durometer N/A 70 | Inside Diameter N/A 0.301 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -903 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 3/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. | |
| 302803 302803/Asset/oring71.jpg | Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.072 in | Durometer N/A 70 | Inside Diameter N/A 0.351 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -904 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 1/4 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
