AS568 Viton O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.. Viton® is also known as: Fluorocarbon and FKM. Viton® is a registered trademarks of DuPont® Dow Elastomers.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Durometer
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 439V90 439V90/Asset/oring71.jpg |
IntegrationID
N/A 192668 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 164.47 mm6.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.040 in1.01 mm | Size Reference - AS568 N/A -439 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 440V75 440V75/Asset/oring71.jpg |
IntegrationID
N/A 192669 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 170.82 mm6.725 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.040 in1.01 mm | Size Reference - AS568 N/A -440 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 440V90 440V90/Asset/oring71.jpg |
IntegrationID
N/A 192670 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 170.82 mm6.725 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.040 in1.01 mm | Size Reference - AS568 N/A -440 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 441V75 441V75/Asset/oring71.jpg |
IntegrationID
N/A 192671 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 177.17 mm6.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.040 in1.01 mm | Size Reference - AS568 N/A -441 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 441V90 441V90/Asset/oring71.jpg |
IntegrationID
N/A 192672 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 177.17 mm6.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.040 in1.01 mm | Size Reference - AS568 N/A -441 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 442V75 442V75/Asset/oring71.jpg |
IntegrationID
N/A 192673 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 183.52 mm7.225 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.045 in1.14 mm | Size Reference - AS568 N/A -442 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 442V90 442V90/Asset/oring71.jpg |
IntegrationID
N/A 192674 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 183.52 mm7.225 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.045 in1.14 mm | Size Reference - AS568 N/A -442 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 443V75 443V75/Asset/oring71.jpg |
IntegrationID
N/A 192675 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 189.87 mm7.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.045 in1.14 mm | Size Reference - AS568 N/A -443 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 443V90 443V90/Asset/oring71.jpg |
IntegrationID
N/A 192676 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 189.87 mm7.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.045 in1.14 mm | Size Reference - AS568 N/A -443 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
| 444V75 444V75/Asset/oring71.jpg |
IntegrationID
N/A 192677 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 196.22 mm7.725 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.045 in1.14 mm | Size Reference - AS568 N/A -444 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 444V90 444V90/Asset/oring71.jpg |
IntegrationID
N/A 192678 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 196.22 mm7.725 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.045 in1.14 mm | Size Reference - AS568 N/A -444 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 445V75 445V75/Asset/oring71.jpg |
IntegrationID
N/A 192679 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 202.57 mm7.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.045 in1.14 mm | Size Reference - AS568 N/A -445 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 445V90 445V90/Asset/oring71.jpg |
IntegrationID
N/A 192680 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 202.57 mm7.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.045 in1.14 mm | Size Reference - AS568 N/A -445 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 446V75 446V75/Asset/oring71.jpg |
IntegrationID
N/A 192681 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 215.27 mm8.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -446 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 446V90 446V90/Asset/oring71.jpg |
IntegrationID
N/A 192682 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 215.27 mm8.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -446 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 447V75 447V75/Asset/oring71.jpg |
IntegrationID
N/A 192683 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 227.97 mm8.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -447 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 447V90 447V90/Asset/oring71.jpg |
IntegrationID
N/A 192684 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 227.97 mm8.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -447 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 448V75 448V75/Asset/oring71.jpg |
IntegrationID
N/A 192685 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 240.67 mm9.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -448 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 448V90 448V90/Asset/oring71.jpg |
IntegrationID
N/A 192686 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 240.67 mm9.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -448 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 449V75 449V75/Asset/oring71.jpg |
IntegrationID
N/A 192687 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 253.37 mm9.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -449 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 449V90 449V90/Asset/oring71.jpg |
IntegrationID
N/A 192688 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 253.37 mm9.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -449 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
| 450V75 450V75/Asset/oring71.jpg |
IntegrationID
N/A 192689 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 266.07 mm10.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -450 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 450V90 450V90/Asset/oring71.jpg |
IntegrationID
N/A 192690 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 266.07 mm10.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -450 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 451V75 451V75/Asset/oring71.jpg |
IntegrationID
N/A 192691 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 278.77 mm10.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -451 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 451V90 451V90/Asset/oring71.jpg |
IntegrationID
N/A 192692 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 278.77 mm10.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -451 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
