AS568 Viton O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.. Viton® is also known as: Fluorocarbon and FKM. Viton® is a registered trademarks of DuPont® Dow Elastomers.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Durometer
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
224V75 224V75/Asset/oring71.jpg |
IntegrationID
N/A 192293 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 44.04 mm1.734 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.015 in0.38 mm | Size Reference - AS568 N/A -224 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
224V90 224V90/Asset/oring71.jpg |
IntegrationID
N/A 192294 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 44.04 mm1.734 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.015 in0.38 mm | Size Reference - AS568 N/A -224 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
225V75 225V75/Asset/oring71.jpg |
IntegrationID
N/A 192295 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 47.22 mm1.859 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.018 in0.46 mm | Size Reference - AS568 N/A -225 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
225V90 225V90/Asset/oring71.jpg |
IntegrationID
N/A 192296 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 47.22 mm1.859 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.018 in0.46 mm | Size Reference - AS568 N/A -225 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
226V75 226V75/Asset/oring71.jpg |
IntegrationID
N/A 192297 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 50.39 mm1.984 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.018 in0.46 mm | Size Reference - AS568 N/A -226 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
226V90 226V90/Asset/oring71.jpg |
IntegrationID
N/A 192298 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 50.39 mm1.984 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.018 in0.46 mm | Size Reference - AS568 N/A -226 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
227V75 227V75/Asset/oring71.jpg |
IntegrationID
N/A 192299 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 53.57 mm2.109 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.018 in0.46 mm | Size Reference - AS568 N/A -227 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
227V90 227V90/Asset/oring71.jpg |
IntegrationID
N/A 192300 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 53.57 mm2.109 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.018 in0.46 mm | Size Reference - AS568 N/A -227 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
228V75 228V75/Asset/oring71.jpg |
IntegrationID
N/A 192301 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 56.74 mm2.234 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.020 in0.50 mm | Size Reference - AS568 N/A -228 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
228V90 228V90/Asset/oring71.jpg |
IntegrationID
N/A 192302 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 56.74 mm2.234 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.020 in0.50 mm | Size Reference - AS568 N/A -228 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
229V75 229V75/Asset/oring71.jpg |
IntegrationID
N/A 192303 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 59.92 mm2.359 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.020 in0.50 mm | Size Reference - AS568 N/A -229 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
229V90 229V90/Asset/oring71.jpg |
IntegrationID
N/A 192304 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 59.92 mm2.359 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.020 in0.50 mm | Size Reference - AS568 N/A -229 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
230V75 230V75/Asset/oring71.jpg |
IntegrationID
N/A 192305 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 63.09 mm2.484 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.020 in0.50 mm | Size Reference - AS568 N/A -230 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
230V90 230V90/Asset/oring71.jpg |
IntegrationID
N/A 192306 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 63.09 mm2.484 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.020 in0.50 mm | Size Reference - AS568 N/A -230 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
231V75 231V75/Asset/oring71.jpg |
IntegrationID
N/A 192307 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 66.27 mm2.609 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.020 in0.50 mm | Size Reference - AS568 N/A -231 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
231V90 231V90/Asset/oring71.jpg |
IntegrationID
N/A 192308 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 66.27 mm2.609 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.020 in0.50 mm | Size Reference - AS568 N/A -231 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
232V75 232V75/Asset/oring71.jpg |
IntegrationID
N/A 192309 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 69.44 mm2.734 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -232 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
232V90 232V90/Asset/oring71.jpg |
IntegrationID
N/A 192310 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 69.44 mm2.734 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -232 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
233V75 233V75/Asset/oring71.jpg |
IntegrationID
N/A 192311 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 72.62 mm2.859 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -233 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
233V90 233V90/Asset/oring71.jpg |
IntegrationID
N/A 192312 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 72.62 mm2.859 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -233 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
234V75 234V75/Asset/oring71.jpg |
IntegrationID
N/A 192313 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 75.79 mm2.984 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -234 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
234V90 234V90/Asset/oring71.jpg |
IntegrationID
N/A 192314 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 75.79 mm2.984 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -234 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
235V75 235V75/Asset/oring71.jpg |
IntegrationID
N/A 192315 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 78.97 mm3.109 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -235 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
235V90 235V90/Asset/oring71.jpg |
IntegrationID
N/A 192316 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 78.97 mm3.109 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -235 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
236V75 236V75/Asset/oring71.jpg |
IntegrationID
N/A 192317 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 82.14 mm3.234 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.024 in0.61 mm | Size Reference - AS568 N/A -236 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |