AS568 Viton O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.. Viton® is also known as: Fluorocarbon and FKM. Viton® is a registered trademarks of DuPont® Dow Elastomers.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Durometer
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
211V90 211V90/Asset/oring71.jpg |
IntegrationID
N/A 192268 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 20.22 mm0.796 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -211 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
212V75 212V75/Asset/oring71.jpg |
IntegrationID
N/A 192269 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 21.82 mm0.859 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -212 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
212V90 212V90/Asset/oring71.jpg |
IntegrationID
N/A 192270 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 21.82 mm0.859 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -212 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
213V75 213V75/Asset/oring71.jpg |
IntegrationID
N/A 192271 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 23.39 mm0.921 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -213 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
213V90 213V90/Asset/oring71.jpg |
IntegrationID
N/A 192272 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 23.39 mm0.921 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -213 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
214V75 214V75/Asset/oring71.jpg |
IntegrationID
N/A 192273 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 24.99 mm0.984 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -214 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
214V90 214V90/Asset/oring71.jpg |
IntegrationID
N/A 192274 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 24.99 mm0.984 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -214 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
215V75 215V75/Asset/oring71.jpg |
IntegrationID
N/A 192275 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 26.57 mm1.046 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -215 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
215V90 215V90/Asset/oring71.jpg |
IntegrationID
N/A 192276 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 26.57 mm1.046 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -215 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
216V75 216V75/Asset/oring71.jpg |
IntegrationID
N/A 192277 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 28.17 mm1.109 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -216 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
216V90 216V90/Asset/oring71.jpg |
IntegrationID
N/A 192278 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 28.17 mm1.109 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -216 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
217V75 217V75/Asset/oring71.jpg |
IntegrationID
N/A 192279 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 29.74 mm1.171 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -217 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
217V90 217V90/Asset/oring71.jpg |
IntegrationID
N/A 192280 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 29.74 mm1.171 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -217 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
218V75 218V75/Asset/oring71.jpg |
IntegrationID
N/A 192281 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 31.34 mm1.234 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -218 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
218V90 218V90/Asset/oring71.jpg |
IntegrationID
N/A 192282 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 31.34 mm1.234 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -218 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
219V75 219V75/Asset/oring71.jpg |
IntegrationID
N/A 192283 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 32.92 mm1.296 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -219 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
219V90 219V90/Asset/oring71.jpg |
IntegrationID
N/A 192284 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 32.92 mm1.296 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -219 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
220V75 220V75/Asset/oring71.jpg |
IntegrationID
N/A 192285 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 34.52 mm1.359 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -220 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
220V90 220V90/Asset/oring71.jpg |
IntegrationID
N/A 192286 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 34.52 mm1.359 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -220 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
221V75 221V75/Asset/oring71.jpg |
IntegrationID
N/A 192287 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 36.09 mm1.421 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -221 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
221V90 221V90/Asset/oring71.jpg |
IntegrationID
N/A 192288 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 36.09 mm1.421 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -221 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
222V75 222V75/Asset/oring71.jpg |
IntegrationID
N/A 192289 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 37.69 mm1.484 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.015 in0.38 mm | Size Reference - AS568 N/A -222 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
222V90 222V90/Asset/oring71.jpg |
IntegrationID
N/A 192290 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 37.69 mm1.484 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.015 in0.38 mm | Size Reference - AS568 N/A -222 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
223V75 223V75/Asset/oring71.jpg |
IntegrationID
N/A 192291 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 40.87 mm1.609 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.015 in0.38 mm | Size Reference - AS568 N/A -223 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
223V90 223V90/Asset/oring71.jpg |
IntegrationID
N/A 192292 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 40.87 mm1.609 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.015 in0.38 mm | Size Reference - AS568 N/A -223 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |