AS568 Polyurethane O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.
Polyurethane is also known as urethane, cast urethan and millable urethane. Exceptional tensile strength. Abrasion and low temperature resistance. Typical applications include hydraulic seals, gaskets, diaphragms, hoses, and wheels for skate boards.
For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
Polyurethane is also known as urethane, cast urethan and millable urethane. Exceptional tensile strength. Abrasion and low temperature resistance. Typical applications include hydraulic seals, gaskets, diaphragms, hoses, and wheels for skate boards.
For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Durometer
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -013 U-90 -013 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190896 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 10.82 mm0.426 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -013 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -014 U-70 -014 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190897 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 12.42 mm0.489 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -014 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -014 U-90 -014 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190898 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 12.42 mm0.489 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -014 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -015 U-70 -015 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190899 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 14.00 mm0.551 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mm | Size Reference - AS568 N/A -015 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -015 U-90 -015 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190900 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 14.00 mm0.551 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mm | Size Reference - AS568 N/A -015 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -016 U-70 -016 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190901 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 15.60 mm0.614 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -016 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -016 U-90 -016 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190902 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 15.60 mm0.614 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -016 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -017 U-70 -017 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190903 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 17.17 mm0.676 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -017 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
| -017 U-90 -017 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190904 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 17.17 mm0.676 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -017 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -018 U-70 -018 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190905 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 18.77 mm0.739 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -018 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -018 U-90 -018 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190906 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 18.77 mm0.739 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -018 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -019 U-70 -019 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190907 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 20.35 mm0.801 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -019 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -019 U-90 -019 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190908 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 20.35 mm0.801 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -019 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -020 U-70 -020 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190909 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 21.95 mm0.864 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -020 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -020 U-90 -020 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190910 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 21.95 mm0.864 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -020 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -021 U-70 -021 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190911 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 23.52 mm0.926 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -021 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -021 U-90 -021 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190912 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 23.52 mm0.926 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -021 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -022 U-70 -022 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190913 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 25.12 mm0.989 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -022 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -022 U-90 -022 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190914 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 25.12 mm0.989 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -022 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -023 U-70 -023 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190915 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 26.70 mm1.051 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -023 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -023 U-90 -023 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190916 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 26.70 mm1.051 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -023 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -024 U-70 -024 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190917 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 28.30 mm1.114 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -024 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -024 U-90 -024 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190918 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 28.30 mm1.114 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -024 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
| -025 U-70 -025 U-70/Asset/oring71.jpg |
IntegrationID
N/A 190919 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 29.87 mm1.176 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.011 in0.28 mm | Size Reference - AS568 N/A -025 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -025 U-90 -025 U-90/Asset/oring71.jpg |
IntegrationID
N/A 190920 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 29.87 mm1.176 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.011 in0.28 mm | Size Reference - AS568 N/A -025 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
