AS568 Neoprene O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -452 C-70 -452 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191969 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 291.47 mm11.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -452 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -453 C-70 -453 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191970 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 304.17 mm11.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -453 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -454 C-70 -454 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191971 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 316.87 mm12.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -454 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -455 C-70 -455 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191972 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 329.57 mm12.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -455 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -456 C-70 -456 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191973 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 342.27 mm13.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -456 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -457 C-70 -457 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191974 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 354.97 mm13.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -457 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -458 C-70 -458 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191975 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 367.67 mm14.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -458 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -459 C-70 -459 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191976 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 380.37 mm14.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -459 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -460 C-70 -460 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191977 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 393.07 mm15.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -460 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -461 C-70 -461 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191978 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 405.26 mm15.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.075 in1.90 mm | Size Reference - AS568 N/A -461 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -462 C-70 -462 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191979 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 417.96 mm16.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.075 in1.90 mm | Size Reference - AS568 N/A -462 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -463 C-70 -463 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191980 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 430.66 mm16.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.080 in2.05 mm | Size Reference - AS568 N/A -463 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -464 C-70 -464 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191981 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 443.36 mm17.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -464 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -465 C-70 -465 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191982 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 456.06 mm17.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -465 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -466 C-70 -466 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191983 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 468.76 mm18.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -466 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -467 C-70 -467 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191984 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 481.46 mm18.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.25 mm | Size Reference - AS568 N/A -467 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -468 C-70 -468 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191985 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 494.16 mm19.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.25 mm | Size Reference - AS568 N/A -468 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -469 C-70 -469 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191986 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 506.86 mm19.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.45 mm | Size Reference - AS568 N/A -469 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -470 C-70 -470 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191987 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 532.26 mm20.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.45 mm | Size Reference - AS568 N/A -470 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -471 C-70 -471 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191988 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 557.66 mm21.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.100 in2.55 mm | Size Reference - AS568 N/A -471 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -472 C-70 -472 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191989 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 582.65 mm22.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.105 in2.65 mm | Size Reference - AS568 N/A -472 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -473 C-70 -473 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191990 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 608.10 mm23.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.110 in2.80 mm | Size Reference - AS568 N/A -473 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -474 C-70 -474 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191991 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 633.50 mm24.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.115 in2.90 mm | Size Reference - AS568 N/A -474 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -475 C-70 -475 C-70/Asset/oring71.jpg |
IntegrationID
N/A 191992 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 658.85 mm25.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.120 in3.05 mm | Size Reference - AS568 N/A -475 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -901 Neoprene-70 -901 Neoprene-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Neoprene | Cross Section Width N/A 0.056 in | Durometer N/A 70 | Inside Diameter N/A 0.185 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -901 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
