AS568 Fluorosilicone O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
-102 F-70 -102 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194906 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 1.24 mm0.049 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -102 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-103 F-70 -103 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194907 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 2.06 mm0.081 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -103 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-104 F-70 -104 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194908 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 2.84 mm0.112 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -104 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-105 F-70 -105 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194909 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 3.63 mm0.143 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -105 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-106 F-70 -106 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194910 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 4.42 mm0.174 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -106 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-107 F-70 -107 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194911 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 5.23 mm0.206 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -107 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-108 F-70 -108 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194912 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 6.02 mm0.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -108 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-109 F-70 -109 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194913 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 7.59 mm0.299 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -109 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-110 F-70 -110 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194914 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 9.19 mm0.362 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -110 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-111 F-70 -111 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194915 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 10.77 mm0.424 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -111 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-112 F-70 -112 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194916 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 12.37 mm0.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.12 mm | Size Reference - AS568 N/A -112 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-113 F-70 -113 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194917 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 13.94 mm0.549 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.17 mm | Size Reference - AS568 N/A -113 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-114 F-70 -114 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194918 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 15.54 mm0.612 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -114 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-115 F-70 -115 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194919 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 17.12 mm0.674 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -115 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-116 F-70 -116 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194920 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 18.72 mm0.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mm | Size Reference - AS568 N/A -116 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-117 F-70 -117 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194921 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 20.29 mm0.799 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -117 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-118 F-70 -118 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194922 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 21.89 mm0.862 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -118 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-119 F-70 -119 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194923 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 23.47 mm0.924 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -119 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-120 F-70 -120 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194924 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 25.07 mm0.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -120 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-121 F-70 -121 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194925 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 26.64 mm1.049 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -121 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-122 F-70 -122 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194926 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 28.24 mm1.112 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.010 in0.25 mm | Size Reference - AS568 N/A -122 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-123 F-70 -123 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194927 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 29.82 mm1.174 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -123 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-124 F-70 -124 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194928 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 31.42 mm1.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -124 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-125 F-70 -125 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194929 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 32.99 mm1.299 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -125 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-126 F-70 -126 F-70/Asset/oring71.jpg |
IntegrationID
N/A 194930 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 34.59 mm1.362 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mm | Size Reference - AS568 N/A -126 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |