AS568 Fluorosilicone O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -902 Fluorosillicone-70 -902 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.064 in | Durometer N/A 70 | Inside Diameter N/A 0.239 mm0.239 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -902 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -903 Fluorosillicone-70 -903 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.064 in | Durometer N/A 70 | Inside Diameter N/A 0.301 mm0.301 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -903 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -904 Fluorosillicone-70 -904 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.072 in | Durometer N/A 70 | Inside Diameter N/A 0.351 mm0.351 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -904 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -905 Fluorosillicone-70 -905 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.072 in | Durometer N/A 70 | Inside Diameter N/A 0.414 mm0.414 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -905 | Units of Measure N/A Imperial | Tube Size O.D. N/A 5/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -906 Fluorosillicone-70 -906 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.078 in | Durometer N/A 70 | Inside Diameter N/A 0.468 mm0.468 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -906 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -907 Fluorosillicone-70 -907 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.082 in | Durometer N/A 70 | Inside Diameter N/A 0.530 mm0.530 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -907 | Units of Measure N/A Imperial | Tube Size O.D. N/A 7/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -908 Fluorosillicone-70 -908 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.087 in | Durometer N/A 70 | Inside Diameter N/A 0.644 mm0.644 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -908 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -909 Fluorosillicone-70 -909 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.097 in | Durometer N/A 70 | Inside Diameter N/A 0.706 mm0.706 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -909 | Units of Measure N/A Imperial | Tube Size O.D. N/A 9/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -910 Fluorosillicone-70 -910 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.097 in | Durometer N/A 70 | Inside Diameter N/A 0.755 mm0.755 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -910 | Units of Measure N/A Imperial | Tube Size O.D. N/A 5/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -911 Fluorosillicone-70 -911 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.863 mm0.863 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -911 | Units of Measure N/A Imperial | Tube Size O.D. N/A 11/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -912 Fluorosillicone-70 -912 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.924 mm0.924 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -912 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -913 Fluorosillicone-70 -913 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.986 mm0.986 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -913 | Units of Measure N/A Imperial | Tube Size O.D. N/A 13/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -914 Fluorosillicone-70 -914 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.047 mm1.047 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -914 | Units of Measure N/A Imperial | Tube Size O.D. N/A 7/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -916 Fluorosillicone-70 -916 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.171 mm1.171 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -916 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -918 Fluorosillicone-70 -918 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.355 mm1.355 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.012 in | Size Reference - AS568 N/A -918 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -920 Fluorosillicone-70 -920 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.118 in | Durometer N/A 70 | Inside Diameter N/A 1.475 mm1.475 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.014 in | Size Reference - AS568 N/A -920 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -924 Fluorosillicone-70 -924 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.118 in | Durometer N/A 70 | Inside Diameter N/A 1.720 mm1.720 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.014 in | Size Reference - AS568 N/A -924 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -928 Fluorosillicone-70 -928 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.118 in | Durometer N/A 70 | Inside Diameter N/A 2.090 mm2.090 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.018 in | Size Reference - AS568 N/A -928 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-3/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -932 Fluorosillicone-70 -932 Fluorosillicone-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.118 in | Durometer N/A 70 | Inside Diameter N/A 2.337 mm2.337 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.018 in | Size Reference - AS568 N/A -932 | Units of Measure N/A Imperial | Tube Size O.D. N/A 2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -901 Fluorosillicone-75 -901 Fluorosillicone-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.056 in | Durometer N/A 75 | Inside Diameter N/A 0.185 mm0.185 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -901 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -902 Fluorosillicone-75 -902 Fluorosillicone-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.064 in | Durometer N/A 75 | Inside Diameter N/A 0.239 mm0.239 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -902 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -903 Fluorosillicone-75 -903 Fluorosillicone-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.064 in | Durometer N/A 75 | Inside Diameter N/A 0.301 mm0.301 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -903 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -904 Fluorosillicone-75 -904 Fluorosillicone-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.072 in | Durometer N/A 75 | Inside Diameter N/A 0.351 mm0.351 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -904 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -905 Fluorosillicone-75 -905 Fluorosillicone-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.072 in | Durometer N/A 75 | Inside Diameter N/A 0.414 mm0.414 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -905 | Units of Measure N/A Imperial | Tube Size O.D. N/A 5/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -906 Fluorosillicone-75 -906 Fluorosillicone-75/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.078 in | Durometer N/A 75 | Inside Diameter N/A 0.468 mm0.468 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -906 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
