AS568 EP O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications. For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart. EP is also known as: Eythylene Propylene, EPR, EPDM, EPT, E.
EP is an elastomer which is characterized by wide range of applications and good chemical resistance. Ethylene propylene compounds have good resistance to detergents, alkalis, mild acids, greases, silicone oils, and alcohols.
EP is an elastomer which is characterized by wide range of applications and good chemical resistance. Ethylene propylene compounds have good resistance to detergents, alkalis, mild acids, greases, silicone oils, and alcohols.
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -452 EP-70 -452 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190847 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 291.47 mm11.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -452 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -453 EP-70 -453 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190848 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 304.17 mm11.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -453 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -454 EP-70 -454 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190849 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 316.87 mm12.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -454 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -455 EP-70 -455 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190850 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 329.57 mm12.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.060 in1.52 mm | Size Reference - AS568 N/A -455 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -456 EP-70 -456 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190851 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 342.27 mm13.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -456 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -457 EP-70 -457 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190852 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 354.97 mm13.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -457 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -458 EP-70 -458 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190853 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 367.67 mm14.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -458 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -459 EP-70 -459 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190854 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 380.37 mm14.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -459 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -460 EP-70 -460 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190855 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 393.07 mm15.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.070 in1.78 mm | Size Reference - AS568 N/A -460 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -461 EP-70 -461 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190856 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 405.26 mm15.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.075 in1.90 mm | Size Reference - AS568 N/A -461 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -462 EP-70 -462 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190857 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 417.96 mm16.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.075 in1.90 mm | Size Reference - AS568 N/A -462 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
| -463 EP-70 -463 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190858 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 430.66 mm16.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.080 in2.05 mm | Size Reference - AS568 N/A -463 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -464 EP-70 -464 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190859 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 443.36 mm17.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -464 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -465 EP-70 -465 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190860 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 456.06 mm17.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -465 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -466 EP-70 -466 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190861 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 468.76 mm18.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.085 in2.15 mm | Size Reference - AS568 N/A -466 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -467 EP-70 -467 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190862 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 481.46 mm18.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.25 mm | Size Reference - AS568 N/A -467 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -468 EP-70 -468 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190863 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 494.16 mm19.455 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.25 mm | Size Reference - AS568 N/A -468 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -469 EP-70 -469 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190864 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 506.86 mm19.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.45 mm | Size Reference - AS568 N/A -469 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -470 EP-70 -470 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190865 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 532.26 mm20.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.090 in2.45 mm | Size Reference - AS568 N/A -470 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -471 EP-70 -471 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190866 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 557.66 mm21.955 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.100 in2.55 mm | Size Reference - AS568 N/A -471 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -472 EP-70 -472 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190867 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 582.65 mm22.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.105 in2.65 mm | Size Reference - AS568 N/A -472 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -473 EP-70 -473 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190868 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 608.10 mm23.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.110 in2.80 mm | Size Reference - AS568 N/A -473 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -474 EP-70 -474 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190869 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 633.50 mm24.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.115 in2.90 mm | Size Reference - AS568 N/A -474 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -475 EP-70 -475 EP-70/Asset/oring71.jpg |
IntegrationID
N/A 190870 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in | Durometer N/A 70 | Inside Diameter N/A 658.85 mm25.940 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.120 in3.05 mm | Size Reference - AS568 N/A -475 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| -903 EP-70 -903 EP-70/Asset/oring71.jpg | Type N/A AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A EP EP | Cross Section Width N/A 0.064 in | Durometer N/A 70 | Inside Diameter N/A 0.301 mm0.301 in | Cross Section Tolerance +/- N/A 0.003 in | Inside Diameter Tolerance +/- N/A 0.005 in | Size Reference - AS568 N/A -903 | Alternate P/N N/A | Units of Measure N/A Imperial Imperial | Tube Size O.D. N/A 3/16 3/32 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
