Monroe
OneMonroe
Locations Throughout the Country
ISO 9001:2015
Tel: (877) 740-2007
Fax: (800) 453-9683
Email: sales@askmonroe.com
Website: monroeengineering.com
Print Back
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.. Viton® is also known as: Fluorocarbon and FKM. Viton® is a registered trademarks of DuPont® Dow Elastomers.

A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
Unit of Measure

Specifications

Type

 N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings

Material

 N/A Viton Viton Viton

Cross Section Width

 N/A 0.070 in1.78 mm

Durometer

 N/A 75

Inside Diameter

 N/A 2.90 mm0.114 in

Cross Section Tolerance +/-

 N/A 0.003 in0.08 mm

Inside Diameter Tolerance +/-

 N/A 0.005 in0.12 mm

Size Reference - AS568

 N/A -006

Country of Origin

 N/A US

Warning

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Alternate P/N

 N/A 006V75

O-Ring Industries

 N/A O-rings are used in the military defense and agriculture industries.