Monroe
OneMonroe
Locations Throughout the Country
ISO 9001:2015
Tel: (877) 740-2007
Fax: (800) 453-9683
Email: sales@askmonroe.com
Website: monroeengineering.com
Print Back
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.

This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
Unit of Measure

Specifications

Type

 N/A AS568 Standard O-Rings

Material

 N/A Fluorosillicone

Cross Section Width

 N/A 0.097 in

Durometer

 N/A 75

Inside Diameter

 N/A 0.706 mm0.706 in

Cross Section Tolerance +/-

 N/A 0.003 in

Inside Diameter Tolerance +/-

 N/A 0.009 in

Size Reference - AS568

 N/A -909

Units of Measure

 N/A Imperial

Tube Size O.D.

 N/A 9/16

O-Ring Industries

 N/A O-rings are used in the military, automotive, aerospace and agriculture industries.