We have a huge variety of industrial hoist rings. Engineered and manufactured to strict standards, our industrial hoist rings are available in several styles including: flip flop hoist rings, heavy duty hoist rings, safety engineered hoist rings, scissor-lok systems, shackle hoist rings, spin-n-lok hoist rings and many more.
HOIST RING MATERIAL: Alloy steel (Certified heat treatment). Black Oxide . SAFETY FACTOR: 5:1
RANGE OF MOVEMENT: 360° Swivel, 180° Pivot
INSTALLATION: Tap work piece for hoist ring screw with axis vertical to mounting surface. Work surface should be flat and smooth to provide full 360° flush seating for the bushing flange. (SAFETY NOTE: Some loosening may develop after prolonged service in a permanent installation. It is advisable to periodically re-tighten the mounting screw to maintain the specified torque value.) The use of free fit spacers between the bushing flange and mounting surface is not recommended as this will reduce the safe load rating on angularly applied loads. Hoist Ring must be free to swivel 360° and pivot 180° at all times.
Material |
N/A Alloy Steel |
Finish |
N/A Black Oxide |
D - Diameter |
N/A 1.00 in |
Safety Factor (Min.) |
N/A 5:1 |
Pivot |
N/A 180 º |
Swivel |
N/A 360 º |
Rated Load |
N/A 7000 lb |
Weight |
N/A 6 lb. 10 oz |
Torque |
N/A 100.00 lb·ft |
A - Radius |
N/A 1.40 in |
B - Base Height |
N/A 1.71 in |
C - Ring Width |
N/A 4.80 in |
E - Thread Length |
N/A 1.54 in |
Thread Length Tolerance |
N/A ± 0.060 in |
F - Height |
N/A 6.52 in |
Height Tolerance |
N/A ± 0.060 in |
G - Thread Size |
N/A 3/4-10 |
H - Inside Clearance |
N/A 3.06 in |
I - Overall Width |
N/A 5.14 in |
Overall Width Tolerance |
N/A ± 0.060 in |
J - Base Width |
N/A 2.37 in |
Country of Origin |
N/A US |
PS - Load Rated |
N/A 7000 Pounds (3175 kg) |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
