The unique base on this PolyMount offsets the lag hole to the outside of the machine footprint, simplifying lag bolt installation. The offset allows you to drill the lag bolt hole without moving the machine, and is capable of fitting up to a 1/2" diameter lag bolt.
| Items |
 LP-6000SSP PolyMounts - Teardrop Stud Style with Pad |
LP-6001SSP PolyMounts - Teardrop Stud Style with Pad |
LP-6002SSP PolyMounts - Teardrop Stud Style with Pad |
LP-6003SSP PolyMounts - Teardrop Stud Style with Pad |
LP-6004SSP PolyMounts - Teardrop Stud Style with Pad |
|||||
| Material | Stainless Steel | |||||||||
| Hex Size | ||||||||||
| Thread Length (C) | 4.00 in | 6.00 in | 8.00 in | 4.00 in | 6.00 in | |||||
| Thread (A) | 1/2-13 | 1/2-13 | 1/2-13 | 5/8-11 | 5/8-11 | |||||
| Base Dia. (B) | 4 in | |||||||||
| Base Width | 5 7/16 in | |||||||||
| Total Height (D) | 5 5/8 in | 7 5/8 in | 9 5/8 in | 5 5/8 in | 7 5/8 in | |||||
| Hex Size (E) | 3/4 in | 3/4 in | 3/4 in | 7/8 in | 7/8 in | |||||
| Max Load (lbs) | 5000 lbs | 5000 lbs | 5000 lbs | 6000 lbs | 6000 lbs | |||||
| Ship Wt. (lbs) | 0.63 lbs | 0.71 lbs | 0.85 lbs | 0.78 lbs | 0.93 lbs | |||||
| Ship Wt. | ||||||||||
| Max Load | 5000 lbs (2268 kg) | 5000 lbs (2268 kg) | 5000 lbs (2268 kg) | 6000 lbs (2722 kg) | 6000 lbs (2722 kg) | |||||
| Stud Length | 4.00 in (102 mm) | 6.00 in (152 mm) | 8.00 in (203 mm) | 4.00 in (102 mm) | 6.00 in (152 mm) | |||||
| PS - Insert | Stud | |||||||||
|
|
||||||||||
