Ergo 5 Lobe Knob - Metric

Material is polypropylene (PP) with molded in brass insert

Economy and value best describes this plastic 5 lobe knob

Textured surface with no sharp edges for a positive grip

Colors available for sufficient quantitiesMade from impact resistant polypropylene (PP) these knobs feature a smooth gripping surface with no sharp edges. Palm area is recessed for a smooth, comfortable feel

Insert material is brass on all versions. Also available with stainless steel insert as special order

Insert is molded in with a slight shoulder effect so all the torque is absorbed by the insert and not the plastic

ELESA Original Design, Ergostyle by Elesa

Unit of Measure

Items	30407 Ergo 5 Lobe Knob - Metric	30408 Ergo 5 Lobe Knob - Metric	30409 Ergo 5 Lobe Knob - Metric	30410 Ergo 5 Lobe Knob - Metric	30411 Ergo 5 Lobe Knob - Metric
Material	N/A Thermoplastic
Mounting Type	N/A Tapped
T - Thread	N/A M5	N/A M6	N/A M6	N/A M8	N/A M8
H - Total Height	N/A 22.50 mm	N/A 22.50 mm	N/A 26.00 mm	N/A 26.00 mm	N/A 31.00 mm
A - Diameter	N/A 32.00 mm	N/A 32.00 mm	N/A 40.00 mm	N/A 40.00 mm	N/A 50.00 mm
B - Hub Diameter	N/A 14.00 mm	N/A 14.00 mm	N/A 15.00 mm	N/A 15.00 mm	N/A 18.00 mm
D - Hub Projection (DS)	N/A 12.50 mm	N/A 12.50 mm	N/A 14.00 mm	N/A 14.00 mm	N/A 17.00 mm
U - Tapped Depth	N/A 10.00 mm	N/A 10.00 mm	N/A 12.00 mm	N/A 13.00 mm	N/A 15.00 mm
Knob Type	N/A Multi Lobed
Protrusion	N/A 0.76 mm
Diameter	N/A 1.26 in (32 mm)	N/A 1.26 in (32 mm)	N/A 1.57 in (40 mm)	N/A 1.57 in (40 mm)	N/A 1.97 in (50 mm)
Stud Length	N/A