Solid - Threaded/Reamed - Inch | OneMonroe

OneMonroe
Locations Throughout the Country
ISO 9001:2015
Tel: (877) 740-2007
Fax: (800) 453-9683
Email: sales@askmonroe.com
Website: monroeengineering.com

Print Back

Made from phenolic based duroplast, these 5 lobe knobs are radiused and polished to provide maximum beauty and comfort

Insert material is available in brass, steel, or stainless steel

Insert is molded in allowing for a slight shoulder effect so the torque is taken up by the insert and not the plastic face

ELESA Original Design.

Solid - Threaded/Reamed - Inch

Unit of Measure

Items	M-29600 Solid - Threaded/Reamed - Inch	M-29610 Solid - Threaded/Reamed - Inch	29611 Solid - Threaded/Reamed - Inch	29612 Solid - Threaded/Reamed - Inch	29613 Solid - Threaded/Reamed - Inch
Material	N/A Duroplast
T - Ream	N/A	N/A	N/A	N/A 0.25 in	N/A 0.31 in
Mounting Type	N/A Tapped	N/A Tapped	N/A Tapped	N/A Reamed	N/A Reamed
T - Thread	N/A 1/4-20	N/A 1/4-20	N/A 5/16-18	N/A	N/A
H - Total Height	N/A 0.91 in	N/A 1.06 in	N/A 1.06 in	N/A 1.06 in	N/A 1.06 in
A - Diameter	N/A 1.18 in	N/A 1.58 in	N/A 1.58 in	N/A 1.58 in	N/A 1.58 in
B - Hub Diameter	N/A 0.71 in	N/A 0.83 in	N/A 0.83 in	N/A 0.83 in	N/A 0.83 in
D - Hub Projection (DS)	N/A
U - Tapped Depth	N/A 0.46 in	N/A 0.46 in	N/A 0.51 in	N/A 0.56 in	N/A 0.64 in
Insert Material	N/A Brass
Knob Type	N/A Multi Lobed
S	N/A 0.43 in	N/A 0.47 in	N/A 0.47 in	N/A 0.47 in	N/A 0.47 in
Diameter	N/A 1.18 in (30 mm)	N/A 1.58 in (40.1 mm)	N/A 1.58 in (40.1 mm)	N/A 1.58 in (40.1 mm)	N/A 1.58 in (40.1 mm)
Stud Length	N/A
Alternate P/N	N/A 29600	N/A 29610	N/A	N/A	N/A