Our industrial cam levers are great for any application where adjustments need to be made for repositioning and clamping. Cam lever fasteners allow for fastening and unfastening and can be used without tools. A user can tighten by threading like a traditional fastener. A user can finalize tightening by pushing the lever downward. Engineered and manufactured to strict standards, our cam levers can be used virtually in every industrial product.
Material, surface finish:
Handle in Cast Aluminum EN AC-46200, black powder-coated;
thrust washer in fiber glass reinforced plastic PA 66 GF 35-X, black;
hinge pin in stainless steel 1.4305, natural finish;
threaded stud and washer in steel, quality class 5.8, blue chromated or stainless steel 1.4305, natural finish
Surface finish:
Handle black, powder-coated. Threaded studs, blue chromated. Hinge pins in stainless steel 1.4305
| Items |
 M65842 Cam Lever - Female - Inch |
M65847 Cam Lever - Female - Inch |
M65941 Cam Lever - Female - Inch |
M65862 Cam Lever - Female - Inch |
M65867 Cam Lever - Female - Inch |
|||||
| A | 70.40 mm | 70.40 mm | 96.00 mm | 70.40 mm | 70.40 mm | |||||
| B | 21.50 mm | 21.50 mm | 33.20 mm | 21.50 mm | 21.50 mm | |||||
| H | 14.50 mm | 14.50 mm | 18 mm | 14.50 mm | 14.50 mm | |||||
| Size | 1.00 | 1.00 | 2.00 | 1.00 | 1.00 | |||||
| D2 | 9.00 mm | 9.00 mm | 11.00 mm | 9.00 mm | 9.00 mm | |||||
| H1 | 22.00 mm | 22.00 mm | 28.50 mm | 22.00 mm | 22.00 mm | |||||
| A1 | 79.20 mm | 79.20 mm | 108.00 mm | 79.20 mm | 79.20 mm | |||||
| D1 | 18.00 mm | 18.00 mm | 27.00 mm | 18.00 mm | 18.00 mm | |||||
| Insert Material | Steel | Steel | Steel | Stainless Steel | Stainless Steel | |||||
| B1 | 15 mm | 15 mm | 24 mm | 15 mm | 15 mm | |||||
| F - Clamping Force | 4.00 kN | 4.00 kN | 8.00 kN | 4.00 kN | 4.00 kN | |||||
| S - Throw | 1.20 mm | 1.20 mm | 1.50 mm | 1.20 mm | 1.20 mm | |||||
| D - Internal Thread | 10-32 in | 1/4-20 in | 5/16-18 in | 10-32 in | 1/4-20 in | |||||
| N - Hand Force | 120 N | 120 N | 350 N | 120 N | 120 N | |||||
|
|
||||||||||
