Polymounts - Stud Style
Polymount Leveling Mounts (14 Styles)
These value oriented levelers are built for a wide range of applications, from conveyor lines to production machinery. Corrosion resistant glass fiber reinforced nylon base is attractive, yet very durable. Base diameters available from 2 inches to 5 inches.
-
Features:
- 15 degree tilt off centerline allows for mounting on uneven surfaces
- Studs are made of either low carbon steel with clear zinc finish or 300 grade stainless steel
- All stud styles come with matching lock nut
- Glass fiber nylon base
- Available with or without non-skid elastomer pad
- "Pop out" lag holes allow for mounting the base to the floor
- Tapped nut style also available for those applications where a mounting stud already exists
Unit of Measure
Items |
/Asset/LP-4000p.jpg LP-4000 Polymounts - Stud Style |
/Asset/LP-4000p.jpg LP-4001 Polymounts - Stud Style |
/Asset/LP-4000p.jpg LP-4002 Polymounts - Stud Style |
/Asset/LP-4000p.jpg LP-4003 Polymounts - Stud Style |
/Asset/LP-4000p.jpg LP-4004 Polymounts - Stud Style |
|||||
Material | N/A Steel | |||||||||
A - Thread Size | N/A 3/8-16 | N/A 1/2-13 | N/A 1/2-13 | N/A 5/8-11 | N/A 5/8-11 | |||||
E - Hex Size | N/A 3/4 in | N/A 3/4 in | N/A 3/4 in | N/A 0.88 in | N/A 0.88 in | |||||
C - Bolt / Thread Length | N/A 4.00 in | N/A 4.00 in | N/A 4.00 in | N/A 4.00 in | N/A 6.00 in | |||||
Load (Max.) | N/A 4000 lb | N/A 4000 lb | N/A 5000 lb | N/A 5000 lb | N/A 6000 lb | |||||
D - Total Height | N/A 5.13 in | N/A 5.13 in | N/A 5.13 in | N/A 5.13 in | N/A 7.33 in | |||||
Max Load | N/A 4000 lbs (1814 kg) | N/A 4000 lbs (1814 kg) | N/A 5000 lbs (2268 kg) | N/A 5000 lbs (2268 kg) | N/A 6000 lbs (2722 kg) | |||||
Stud Length | N/A 4.00 in (102 mm) | N/A 4.00 in (102 mm) | N/A 4.00 in (102 mm) | N/A 4.00 in (102 mm) | N/A 6.00 in (152 mm) | |||||
PS - Insert | N/A Stud | |||||||||
|