Ergo 5 Lobe Knob - Metric

Material is polypropylene (PP) with molded in brass insert

Economy and value best describes this plastic 5 lobe knob

Textured surface with no sharp edges for a positive grip

Colors available for sufficient quantitiesMade from impact resistant polypropylene (PP) these knobs feature a smooth gripping surface with no sharp edges. Palm area is recessed for a smooth, comfortable feel

Insert material is brass on all versions. Also available with stainless steel insert as special order

Insert is molded in with a slight shoulder effect so all the torque is absorbed by the insert and not the plastic

ELESA Original Design, Ergostyle by Elesa

Request Information Search by Specification

Unit of Measure

Items	30407 Ergo 5 Lobe Knob - Metric	30408 Ergo 5 Lobe Knob - Metric	30409 Ergo 5 Lobe Knob - Metric	30410 Ergo 5 Lobe Knob - Metric	30411 Ergo 5 Lobe Knob - Metric
Material	N/A Thermoplastic
Mounting Type	N/A Tapped
T - Thread	N/A M5	N/A M6	N/A M6	N/A M8	N/A M8
H - Total Height	N/A 22.50 mm	N/A 22.50 mm	N/A 26.00 mm	N/A 26.00 mm	N/A 31.00 mm
A - Diameter	N/A 32.00 mm	N/A 32.00 mm	N/A 40.00 mm	N/A 40.00 mm	N/A 50.00 mm
B - Hub Diameter	N/A 14.00 mm	N/A 14.00 mm	N/A 15.00 mm	N/A 15.00 mm	N/A 18.00 mm
D - Hub Projection (DS)	N/A 12.50 mm	N/A 12.50 mm	N/A 14.00 mm	N/A 14.00 mm	N/A 17.00 mm
U - Tapped Depth	N/A 10.00 mm	N/A 10.00 mm	N/A 12.00 mm	N/A 13.00 mm	N/A 15.00 mm
Knob Type	N/A Multi Lobed
Protrusion	N/A 0.76 mm
Diameter	N/A 1.26 in (32 mm)	N/A 1.26 in (32 mm)	N/A 1.57 in (40 mm)	N/A 1.57 in (40 mm)	N/A 1.97 in (50 mm)
Stud Length	N/A