Leveling Pads with Vibration Absorption - Metric

Material:

Steel version: pressure foot in tempered steel. Ball element in case-hardened free-cutting steel

Stainless steel version: pressure foot and ball element in stainless steel

Surface finish:

Steel version: pressure foot black oxide finish. Ball element in case-hardened; black oxide finish

Stainless steel version: natural finish

Damper plate PUR elastomere, gray, fixed, cannot slip. range of use from -30 °C to +70 °C. Damper plate PUR elastomere (Sylomer V12).

Note: The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Swivel Foot. Swivel Foot (without vibration absorption) see 07144. This is a Kipp Original Design.

Request Information

Unit of Measure

Items	M66785 Leveling Pads with Vibration Absorption - Metric	M66786 Leveling Pads with Vibration Absorption - Metric	M66787 Leveling Pads with Vibration Absorption - Metric	M66788 Leveling Pads with Vibration Absorption - Metric	M66793 Leveling Pads with Vibration Absorption - Metric
Material	N/A Steel	N/A Steel	N/A Steel	N/A Steel	N/A Stainless Steel
D2	N/A 32.00 mm	N/A 40.00 mm	N/A 50.00 mm	N/A 60.00 mm	N/A 32.00 mm
D3	N/A 31.00 mm	N/A 31.00 mm	N/A 41.00 mm	N/A 50.00 mm	N/A 31.00 mm
H2	N/A 5.00 mm	N/A 6.00 mm	N/A 7.0 mm	N/A 8.00 mm	N/A 5.00 mm
H1	N/A 22.00 mm	N/A 26.00 mm	N/A 32.00 mm	N/A 42.00 mm	N/A 22.00 mm
T	N/A 10.00 mm	N/A 12.00 mm	N/A 14.00 mm	N/A 18.00 mm	N/A 10.00 mm
D1	N/A M10 mm	N/A M12 mm	N/A M16 mm	N/A M20 mm	N/A M10 mm
SW	N/A 17 mm	N/A 19 mm	N/A 24 mm	N/A 30 mm	N/A 17 mm
H3 (under pressure of 0 / 0.4 / 0.6 N/mm²)	N/A 8 / 6.8 / 5.9 mm
Load capacity (under pressure of 0.4 N/mm²)	N/A 212 N	N/A 212 N	N/A 435 N	N/A 705 N	N/A 212 N
Max Load	N/A
Stud Length	N/A