CFS Hinges - Built-in Safety Switch

High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin.

Fitting by means of:

2 pairs of nickel-plated brass bushings with tapped hole
2 pairs of nickel-plated steel studs
2 pairs of through holes for hexagonal-head screws

Features

Rotation angle: max 270°, between 0° and -90° and between 0° and 180° (0° = where the two interconnected surfaces are on the same plane).Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance (see drawing
The rotation stud pin, fully inserted into the hinge body, cannot be extracted, preventing from any hinge tampering. This characteristic makes the hinge particularly suitable on structures or equipment requiring protection against intrusion. Elesa Original Design.

Request Information

Unit of Measure

Items	426531 CFS Hinges - Built-in Safety Switch	426521 CFS Hinges - Built-in Safety Switch	426533 CFS Hinges - Built-in Safety Switch	426523 CFS Hinges - Built-in Safety Switch	426592 CFS Hinges - Built-in Safety Switch
Weight	N/A 0.187 lbs
L	N/A 2.05 in
B	N/A 2.76 in
F	N/A 1.34 in
H	N/A 0.63 in
b2	N/A	N/A	N/A	N/A	N/A 0.26 in
f2	N/A	N/A	N/A 2.03 in	N/A 2.03 in	N/A
f3	N/A	N/A	N/A 0.89 in	N/A 0.89 in	N/A
L1	N/A 4.33 in
h3	N/A	N/A	N/A	N/A	N/A 0.16 in
h4	N/A 0.55 in
d4	N/A 0.49 in	N/A 0.49 in	N/A 0.49 in	N/A 0.49 in	N/A
b3	N/A	N/A	N/A	N/A	N/A 0.41 in
h1	N/A 0.31 in
h2	N/A 0.30 in
d3	N/A 0.26 in	N/A 0.26 in	N/A 0.26 in	N/A 0.26 in	N/A
d	N/A 0.31 in
f1	N/A 1.77 in	N/A 1.77 in	N/A 1.77 in	N/A 1.77 in	N/A 1.57 in