Vibro-Leveler Machine Mount | OneMonroe

Simple in design and construction, each Vibro Leveler has an inner cylinder with attached stud. These are insulated from the outer shell by a wall of mechanically bonded rubber.

Features:

Install Quickly and Easily
Require No Special Parts or Maintenance
Come Complete, Require No Tapping or Fitting
Protect Machineryfrom Damaging Effects of Vibration and Shock

Request Information Search by Specification

Unit of Measure

Items	MM10-10 Vibro-Leveler Machine Mount	MM10-25 Vibro-Leveler Machine Mount	MM10-50 Vibro-Leveler Machine Mount	MM10-100 Vibro-Leveler Machine Mount	MM10-200 Vibro-Leveler Machine Mount
Load Capacity of Each Mounting	N/A 10 lbs	N/A 25 lbs	N/A 50 lbs	N/A 100 lbs	N/A 200 lbs
Max. (Avg) Deflection Under Rated Load	N/A 0.0625
A - Height Floor to Top of Nut Min. Ht Above Floor	N/A 1.13 in	N/A 1.63 in	N/A 1.63 in	N/A 1.75 in	N/A 2.25 in
B - Height (O.A.) Mount Including Stud	N/A 2.13 in	N/A 2.75 in	N/A 2.75 in	N/A 3.00 in	N/A 3.75 in
C - Height of Stud Above Lower Nut	N/A 1.00 in	N/A 1.00 in	N/A 1.00 in	N/A 1.13 in	N/A 1.38 in
D - Diamter of Stud	N/A 5/16 in	N/A 3/8 in	N/A 3/8 in	N/A 3/8 in	N/A 1/2 in
E - Diameter of Housing	N/A 1.25 in	N/A 1.25 in	N/A 1.25 in	N/A 1.50 in	N/A 1.75 in
F - Bolt Hole Center	N/A 1.88 in	N/A 1.88 in	N/A 1.88 in	N/A 2.44 in	N/A 2.75 in
G - Diamtere of Base	N/A 2.50 in	N/A 2.50 in	N/A 2.50 in	N/A 3.00 in	N/A 3.50 in
H - Flange Height	N/A 0.17 in
I - Diameter of Bolt Holes in Base	N/A 0.25 in	N/A 0.25 in	N/A 0.25 in	N/A 0.31 in	N/A 0.38 in
J - Height of Body Above Flange	N/A 0.56 in	N/A 1.00 in	N/A 1.00 in	N/A 1.13 in	N/A 1.50 in