OneMonroe's Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water.

Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water. They are approved to operate between -55 C and + 65 C and can be installed above ground, in metal cans or direct buried.

Integro Series Isolation Transformers are installed at most major airports in the United States and Mexico, as well as in many countries in South America, Europe, Asia and Africa. Our American made Series Isolation Transformers are also preferred at many military airports in the United States.

Integro Series Isolation Transformers are approved to the FAA L-830 specification and are certified by ITS Testing Labs to FAA Advisory Circular 150/5345-47. All Integro Transformers undergo 100% Quality Testing which includes visual inspection, ratio testing, heat testing and HIPOT testing after heating and 12 hour soaking.

Integro Series Isolation Transformers are wound for 6.6 and 20 Amp primary circuit applications. They are encapsulated in thermoplastic rubber for superior durability and dielectric strength and are manufactured with 2 primary and 1 secondary FAA L-823 listed leads.

Style 2 – Male Primary Lead on 8/1 cable, 24" long.

Style 9 – Female Primary Lead on 8/1 cable, 24" long (Both leads are rated 25 Amps and 5,000 Volts).

Style 8 – Female Secondary Lead on 12/2 cable, (rated 20 Amps and 600 Volts), 48" long.

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water.

Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water. They are approved to operate between -55 C and + 65 C and can be installed above ground, in metal cans or direct buried.

Integro Series Isolation Transformers are installed at most major airports in the United States and Mexico, as well as in many countries in South America, Europe, Asia and Africa. Our American made Series Isolation Transformers are also preferred at many military airports in the United States.

Integro Series Isolation Transformers are approved to the FAA L-831 specification and are certified by ITS Testing Labs to FAA Advisory Circular 150/5345-47. All Integro Transformers undergo 100% Quality Testing which includes visual inspection, ratio testing, heat testing and HIPOT testing after heating and 12 hour soaking.

Integro Series Isolation Transformers are wound for 6.6 and 20 Amp primary circuit applications. They are encapsulated in thermoplastic rubber for superior durability and dielectric strength and are manufactured with 2 primary and 1 secondary FAA L-823 listed leads.

Style 2 – Male Primary Lead on 8/1 cable, 24" long

Style 9 – Female Primary Lead on 8/1 cable, 24" long (Both leads are rated 25 Amps and 5000 Volts)

Style 8 – Female Secondary Lead on 12/2 cable (rated 20 Amps and 600 Volts), 48" long

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water.

Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water. They are approved to operate between -55 C and + 65 C and can be installed above ground, in metal cans or direct buried.

Integro ICAO Style Earthed Series Isolation Transformers are tested in accordance with the FAA L-830 (60 Hz) and L-831 (50 Hz) specifications per FAA Advisory Circular 150/5345-47. All Integro Earthed Transformers undergo 100% Quality Testing which includes visual inspection, ratio testing, heat testing and HIPOT testing.

Integro ICAO Style Earthed Series Isolation Transformers come equipped with an earthed stud for grounding in the field. Although earthed transformers are not listed under FAA guidelines, Integro earthed transformers are manufactured in accordance with L-830 (60 Hz) or L-831 (50 Hz) specifications.

Style 2– Male Primary Lead on 8/1 cable, 24? long

Style 9– Female Primary Lead on 8/1 cable, 24? long (Both leads are rated 25 Amps and 5,000 Volts)

Style 8– Female Secondary Lead on 12/2 cable, 48? long (Rated 20 Amps and 600 Volts)

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro Primary Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airfield Lighting Cable on primary power circuits.

Integro Primary Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airfield Lighting Cable on primary power circuits.

Integro Primary Connector Kits are used on all installations with our transformers and are installed in all the same regions.

Integro Primary Connector Kits are approved to the FAA L-823 specification and are certified by Intertek Testing Labs to FAA Advisory Circular 150/5345-26.

Integro Primary Connector Kits are molded in thermoplastic rubber for superior dielectric strength, and to ensure watertight connections in the field. Each molded kit housing is filled with insulating silicone to fill voids. They are rated 25 Amps and 5,000 Volts.

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro Primary Colored Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airfield Lighting Cable on primary power circuits.

Application/Design - Integro Primary Colored Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airfield Lighting Cable on primary power circuits.

Where They are Used - Integro Primary Colored Connector Kits are used on all installations with our transformers and are installed in all the same regions.

Approvals - Integro Primary Colored Connector Kits are approved to the FAA L-823 specification and are certified by Intertek Testing Labs to FAA Advisory Circular 150/5345-26.

Design - Integro Primary Colored Connector Kits are molded in thermoplastic rubber for superior dielectric strength, and to ensure watertight connections in the field. Each molded kit housing is filled with insulating silicone to fill voids. They are rated 25 Amps and 5,000 Volts.

XX – Size Code (O1, 02, 04, 05, 08, 09, 10)

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro Complete Kit Shielded Primary Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airfield Lighting Cable on primary power circuits.

Integro Complete Kit Shielded Primary Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airfield Lighting Cable on primary power circuits.

Integro Complete Kit Shielded Primary Connector Kits are installed with screened (shielded) cable and are used to terminate and complete the connection of two shielded cables.

Integro Complete Kit Shielded Primary Connector Kits comply with the FAA L-823 specification and are certified by Intertek Testing Labs to FAA Advisory Circular 150/5345-26.

Integro Complete Kit Shielded Primary Connector Kits are molded in thermoplastic rubber for superior dielectric strength, and to ensure watertight connections in the field. Each molded kit housing is filled with insulating silicone to fill voids. They are rated 25 Amps and 5,000 Volts.

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

Both types of OneMonroe's Integro male and female Secondary Connector Kits are molded in synthetic rubber for superior dielectric strength, and to ensure watertight connection in the field.

Both types of Integro male and female Secondary Connector Kits are molded in synthetic rubber for superior dielectric strength, and to ensure watertight connection in the field. Each kit comes with a molded male or female connector housing, as well as an instruction sheet and grease packet for installation. They are 20 Amps and 600 Volts.

Both types of Integro Secondary Connector Kits are used to make serviceable in field splice connections on both single wires (Style 4 and Style 11) and two conductor cable (Style 5 and Style 12) in secondary lighting circuits. They can be used to assemble a secondary extension, terminate a fixture lead, or connect a transformer secondary lead.

Integro Primary Connector Kits are used on all installations with our transformers and are installed in all the same regions.

Integro Secondary Connector Kits are approved to the FAA L-823 specification and are certified by ITS Testing Labs to FAA Advisory Circular 150/5345-26.

• 11254-XX – Style 4 Male – two wires
• 11255-XX – Style 11 Female – two wires
• XX – Size Code (11, 21, 12, 22)
• 11432-XX – Style 5 Male – two conductor cable
• 11433-XX – Style 12 Female – two conductor cable
• XX – Size Code (31, 41, 32, 42)

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro Fixture Leads are designed to be an FAA Approved Secondary Plug for all lights used on an airfield runway. They are used with approach, taxiway centerline and edgeway, runway centerline and edgeway, touch down zone and sign lights. They typically come installed on a purchased light, but can also be bought separately for in-field installation. Our Style 1 Fixture Leads can be manufactured to fit any lamp voltage, cable type, length or other special requirements.

Integro Fixture Leads are designed to be an FAA Approved Secondary Plug for all lights used on an airfield runway. They are used with approach, taxiway centerline and edgeway, runway centerline and edgeway, touch down zone and sign lights. They typically come installed on a purchased light, but can also be bought separately for in-field installation. Our Style 1 Fixture Leads can be manufactured to fit any lamp voltage, cable type, length or other special requirements.

Integro Fixture Leads are factory installed, and preferred worldwide by most airfield light manufacturers in the United States and Europe. Replacement leads have also been sent to the field and installed at airports throughout the world.

Integro Fixture Leads are approved to the FAA L-823 specification and are certified by Intertek Testing Labs to FAA Advisory Circular 150/5345-26.

Integro Fixture Leads are molded in synthetic rubber and thermoplastic rubber for superior durability and dielectric strength. They are built using a number of cable configurations with varying temperature ratings. Integro offers both Style 1 (standard size) and Style 6 (mini size) Fixture Leads. The Style 6 design is preferred for applications where there is very little space on the can or base (ie shallow base cans).

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro Secondary Receptacles are used for custom installations that require a connection to secondary power circuits using either a factory molded L-823 Style 7 (Straight Design) or a Style 8 (Ball Design) female connector.

Integro Secondary Receptacles are used for custom installations that require a connection to secondary power circuits using either a factory molded L-823 Style 7 (Straight Design) or a Style 8 (Ball Design) female connector.

Integro Secondary Receptacles are molded in synthetic rubber for superior durability and dielectric strength. Both the Style 7 and Style 8 connectors are designed to mate with Style 1 or Style 6 factory molded plugs, as well as an in-field Style 4 or Style 5 spliced plugs. They are rated 20 Amps and 600 Volts.

Integro Secondary Receptacles are approved to the FAA L-823 specification and are certified by Intertek Testing Labs to FAA Advisory Circular 150/5345-26.

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro Secondary Extension Cords are used for making above or below ground connections between taxiway, runway and sign lights, PAPI’s, VASI’s and other specialty lights, and the Series Isolation Transformer, where they are located at different positions on the airport runway.

Integro Secondary Extension Cords are used for making above or below ground connections between taxiway, runway and sign lights, PAPI’s, VASI’s and other specialty lights, and the Series Isolation Transformer, where they are located at different positions on the airport runway.

Integro Secondary Extension Cords are molded in thermoplastic rubber for superior durability and dielectric strength. They come with an L-823 Style 1 male Fixture Lead on one end and either an L-823 Style 7 (Straight Design) or an L-823 Style 8 (Ball Design) female Receptacle on the other end. The Style 7 model is generally used for above ground applications, while the Style 8 model is used for applications where strain relief is required. Both female ends are designed to mate with an L-823 Style 1 Fixture Lead.

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro Primary Leads are used for custom installations that require connection to primary power circuits using a factory molded L-823 Style 2 male, or Style 9 female connector. Both connectors are molded to #8 AWG Airfield Lighting Cable.

Integro Primary Leads are used for custom installations that require connection to primary power circuits using a factory molded L-823 Style 2 male, or Style 9 female connector. Both connectors are molded to #8 AWG Airfield Lighting Cable.

Integro Primary Leads are molded in thermoplastic rubber for superior durability and dielectric strength. They can be manufactured as blunt cut pigtails, or as extensions. Both Style 2 and Style 9 connectors are rated 25 Amps and 5,000 Volts.

Integro Primary Leads are approved to the FAA L-823 specification and are certified by Intertek Testing Labs to FAA Advisory Circular 150/5345-26.

• 11254-XX – Style 4 Male – two wires
• 11255-XX – Style 11 Female – two wires
• XX – Size Code (11, 21, 12, 22)
• 11432-XX – Style 5 Male – two conductor cable
• 11433-XX – Style 12 Female – two conductor cable
• XX – Size Code (31, 41, 32, 42)

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.

OneMonroe's Integro Voltage Transformers are used in parallel circuits on airfields to step down the utility (line) voltage to run 6.6 Amp airfield lighting products. They are encapsulated and designed to operate efficiently while submerged in water. They are approved to operate between -55 C and + 65 C and can be installed above ground, in metal cans or directly buried.

Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water. They are approved to operate between -55 C and + 65 C and can be installed above ground, in metal cans or direct buried.

Integro Series Isolation Transformers are installed at most major airports in the United States and Mexico, as well as in many countries in South America, Europe, Asia and Africa. Our American made Series Isolation Transformers are also preferred at many military airports in the United States.

Integro Series Isolation Transformers are approved to the FAA L-830 specification and are certified by ITS Testing Labs to FAA Advisory Circular 150/5345-47. All Integro Transformers undergo 100% Quality Testing which includes visual inspection, ratio testing, heat testing and HIPOT testing after heating and 12 hour soaking.

Integro Series Isolation Transformers are wound for 6.6 and 20 Amp primary circuit applications. They are encapsulated in thermoplastic rubber for superior durability and dielectric strength and are manufactured with 2 primary and 1 secondary FAA L-823 listed leads.

We proudly manufacture all of our products in the USA, all of our Airfield Lighting Power equipment meets the Buy American Preference requirements in 49 USC 50101 and is certified to be used on AIP-funded projects requiring Buy American Preferences.